Waste Heat Utilisation in Automotive Factories
From On-Site Heat Coverage to District Heating Contribution
DOI:
https://doi.org/10.52825/isec.v2i.3342Keywords:
Waste Heat Utilisation, Automotive Manufacturing, District HeatingAbstract
The decarbonisation of industrial heat supply requires a realistic assessment of how waste heat can contribute to factory-level energy systems and where applicable, to external heat networks. This paper analyses temperature-specific waste heat potentials in automotive factories, distinguishing between vehicle assembly and component production. Waste heat sources are classified according to their integration feasibility, differentiating between directly usable heat and lower-temperature heat requiring upgrading via heat pumps. Using real-world operational data from eight automotive factories, waste heat potentials are quantified relative to site-specific heat demand. The results show that vehicle assembly factories exhibit relatively homogeneous shares of directly usable waste heat, while indirectly usable potentials vary strongly across sites, particularly in component manufacturing. To capture temporal utilisation constraints, a time-resolved case study is conducted for one vehicle assembly factory, combining hourly waste heat availability, internal heat demand and the load of an external district heating network. The dynamic analysis indicates that a substantial share of available waste heat can be utilised internally over the year, including periods of full internal heat coverage, while only limited surpluses remain available for external use. Overall, the findings underline the importance of factory-level, time-resolved analyses for identifying realistically utilisable waste heat shares and for supporting site-specific planning of waste heat integration under realistic constraints, thereby supporting the decarbonisation of industrial and urban thermal energy systems.
Downloads
References
[1] G. P. Thiel and A. K. Stark, “To decarbonize industry, we must decarbonize heat,” Joule, vol. 5, no. 3, pp. 531–550, Mar. 2021, doi: https://doi.org/10.1016/j.joule.2021.01.011. DOI: https://doi.org/10.1016/j.joule.2020.12.007
[2] AG Energiebilanzen e.V., “Anwendungsbilanzen zur Energiebilanz Deutschland. Endenergieverbrauch nach Energieträgern und Anwendungszwecken. Detaillierte Anwendungsbilanzen der Endenergiesektoren für 2021 und 2022 sowie zusammenfassende Zeitreihen zum Endenergieverbrauch nach Energieträgern und Anwendungszwecken für Jahre von 2012 bis 2022,” Berlin, Germany, 2023. Accessed: Feb. 10, 2026. [Online.] Available: https://ag-energiebilanzen.de/wp-content/uploads/2023/01/AGEB_22p2_rev-1.pdf.
[3] R.-H. Hechelmann, F. Schlosser, H. Meschede, and A. Schlüter, “Preparing the Ground with Energy Efficiency,” in Sustainable and Smart Energy Systems for Europe’s Cities and Rural Areas, A. Schlüter and J. Bernabé-Moreno, Eds. Munich, Germany: Hanser, 2022. DOI: https://doi.org/10.1007/978-3-446-47175-7_8
[4] C. Rohde, “Erstellung von Anwendungsbilanzen für die Jahre 2021 bis 2023 für die Sektoren Industrie und GHD – Studie für die Arbeitsgemeinschaft Energiebilanzen e.V. (AGEB),” Karlsruhe, Germany: Fraunhofer-Institut für System- und Innovationsforschung ISI, 2024. Accessed: Feb. 10, 2026. [Online.] Available: https://ag-energiebilanzen.de/wp-content/uploads/2024/01/Anwendungsbilanz_Industrie_2022_vorlaeufig-update_20231030.pdf.
[5] A. Giampieri, J. Ling-Chin, W. Taylor, A. Smallbone, and A. P. Roskilly, “Moving towards low-carbon manufacturing in the UK automotive industry,” Energy Procedia, vol. 158, pp. 3381–3386, 2019, doi: https://doi.org/10.1016/j.egypro.2019.01.946. DOI: https://doi.org/10.1016/j.egypro.2019.01.946
[6] G. Kosmadakis, “Estimating the potential of industrial (high-temperature) heat pumps for exploiting waste heat in EU industries,” Appl. Therm. Eng., vol. 156, pp. 287–298, Jul. 2019, doi: https://doi.org/10.1016/j.applthermaleng.2019.04.082. DOI: https://doi.org/10.1016/j.applthermaleng.2019.04.082
[7] J. Pelda, F. Stelter, and S. Holler, “Potential of integrating industrial waste heat and solar thermal energy into district heating networks in Germany,” Energy, vol. 203, 117812, May 2020, doi: https://doi.org/10.1016/j.energy.2020.117812. DOI: https://doi.org/10.1016/j.energy.2020.117812
[8] M. Papapetrou, G. Kosmadakis, A. Cipollina, U. La Commare, and G. Micale, “Industrial waste heat: Estimation of the technically available resource in the EU per industrial sector, temperature level and country,” Appl. Therm. Eng., vol. 138, pp. 207–216, Jun. 2018, doi: https://doi.org/10.1016/j.applthermaleng.2018.04.043. DOI: https://doi.org/10.1016/j.applthermaleng.2018.04.043
[9] G. Bianchi, G. P. Panayiotou, L. Aresti, S. A. Kalogirou, G. A. Florides, K. Tsamos, and P. Christodoulides, “Estimating the waste heat recovery in the European Union industry,” Energy Ecol. Environ., vol. 4, no. 5, pp. 211–221, Oct. 2019, doi: https://doi.org/10.1007/s40974-019-00132-7. DOI: https://doi.org/10.1007/s40974-019-00132-7
[10] S. Brueckner, R. Arbter, M. Pehnt, et al., “Industrial waste heat potential in Germany – a bottom-up analysis,” Energy Efficiency, vol. 10, pp. 513–525, May 2017, doi: https://doi.org/10.1007/s12053-016-9463-6. DOI: https://doi.org/10.1007/s12053-016-9463-6
[11] P. Manz, K. Kermeli, U. Persson, M. Neuwirth, T. Fleiter, and W. Crijns-Graus, “Decarbonizing district heating in EU-27+ UK: how much excess heat is available from industrial sites?” Sustainability, vol. 13, no. 3, p. 1439, Feb. 2021, doi: https://doi.org/10.3390/su13031439. DOI: https://doi.org/10.3390/su13031439
[12] V. Burg, F. Richardet, S. Wälty, R. Roshandel, and S. Hellweg, “Mapping local synergies: Spatio-temporal analysis of Switzerland’s waste heat potentials vs. heat demand,” Energies, vol. 17, no. 1, 106, Jan. 2024, doi: https://doi.org/10.3390/en17010106. DOI: https://doi.org/10.3390/en17010106
[13] L. Theisinger, T. Kohne, F. Borst, and M. Weigold, “Modeling approach and simulation study to assess the utilization potential of industrial waste heat in district heating systems,” Procedia CIRP, vol. 105, pp. 339–344, 2022, doi: https://doi.org/10.1016/j.procir.2022.02.056. DOI: https://doi.org/10.1016/j.procir.2022.02.056
[14] A. Giampieri, J. Ling-Chin, Z. Ma, A. Smallbone, and A. P. Roskilly, “A review of the current automotive manufacturing practice from an energy perspective,” Appl. Energy, vol. 261, 114074, Mar. 2020, doi: https://doi.org/10.1016/j.apenergy.2019.114074. DOI: https://doi.org/10.1016/j.apenergy.2019.114074
[15] P. Dehning, “Steigerung der Energieeffizienz von Fabriken der Automobilproduktion,” AutoUni – Schriftenreihe, no. 104, 2017. DOI: https://doi.org/10.1007/978-3-658-19098-9
[16] U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, “Technology roadmap for energy reduction in automotive manufacturing,” Washington, DC, USA, 2008. Accessed: Feb. 10, 2026. [Online.] Available: https://www1.eere.energy.gov/manufacturing/intensiveprocesses/pdfs/auto_industry_roadmap.pdf.
[17] M. A. Omar, “The Automotive Body Manufacturing Systems and Processes”. Hoboken, NJ, USA: John Wiley & Sons, 2011. DOI: https://doi.org/10.1002/9781119990888
[18] I. Labbus, “Cyber-physische Produktionssysteme für die energieeffiziente Komponentenproduktion,” AutoUni – Schriftenreihe, no. 152, 2021. DOI: https://doi.org/10.1007/978-3-658-32828-3
[19] M. Kropik, “Produktionsleitsysteme für die Automobilindustrie“, Berlin, Germany: Springer Vieweg, 2021. DOI: https://doi.org/10.1007/978-3-662-62227-8
[20] J. Engelmann, “Methoden und Werkzeuge zur Gestaltung energieeffizienter Fabriken,” Wissenschaftliche Schriftenreihe des Institutes für Betriebswissenschaften und Fabriksysteme, no. 71, Chemnitz, Germany, 2009.
[21] L. Feng and L. Mears, “Energy consumption modeling and analyses in automotive manufacturing plant,” J. Manuf. Sci. Eng., vol. 138, no. 10, 101005, Oct. 2016, doi: https://doi.org/10.1115/1.4034302. DOI: https://doi.org/10.1115/1.4034302
[22] Verein Deutscher Ingenieure (VDI), “VDI 3455: Emissionsminderung – Anlagen zur Serienlackierung von Automobilkarosserien,” Düsseldorf, Germany, 2013.
[23] J. Roscher, “Bewertung von Flexibilitätsstrategien für die Endmontage in der Automobilindustrie,” Univ. Stuttgart, Stuttgart, Germany, 2008.
[24] C. Imgrund, “Ganzheitliche Nachhaltigkeit in der Fahrzeugmontage,” ATZproduktion, vol. 4, pp. 44–49, 2011, doi: https://doi.org/10.1365/s35726-011-0043-4. DOI: https://doi.org/10.1365/s35726-011-0043-4
[25] L. Feng, D. Ulutan, and L. Mears, “Energy consumption modeling and analyses in automotive manufacturing final assembly process,” in Proc. IEEE Conf. Technologies for Sustainability (SusTech), Ogden, UT, USA, 2015, pp. 224–228, doi: https://doi.org/10.1109/SusTech.2015.7314350. DOI: https://doi.org/10.1109/SusTech.2015.7314350
[26] G. Zäpfel, “Grundzüge des Produktions- und Logistikmanagement,” Berlin, Germany: Walter de Gruyter GmbH & Co. KG, 2021.
[27] A. Zhivov, “Ventilation guide for automotive industry,” Columbus, OH, USA: HPAC Engineering, 2000.
[28] F. Kılıç, M. Eyidoğan, and S. Sapmaz, “Bir otomobil montaj işletmesinde enerji verimliliği artırıcı çözümlerin irdelenmesi,” Gazi Univ. J. Sci. Part C: Des. Technol., vol. 6, no. 1, pp. 149–162, 2018. DOI: https://doi.org/10.29109/http-gujsc-gazi-edu-tr.331104
[29] F. Ahrendts et al., “Roll-out von Großwärmepumpen in Deutschland,” Fraunhofer IEG, 2023, doi: https://doi.org/10.24406/publica-1440.
[30] C. Schulze, B. Raabe, C. Herrmann, and S. Thiede, “Environmental impacts of cooling tower operations—The influence of regional conditions on energy and water demands,” Procedia CIRP, vol. 69, pp. 277–282, 2018, doi: https://doi.org/10.1016/j.procir.2017.11.034. DOI: https://doi.org/10.1016/j.procir.2017.11.034
[31] M. Schäfer, J. Wagner, A. Schlüter, and J. Hesselbach, “Energy flows in industrial buildings and machines using the example of a node model,” Simul. Notes Eur., vol. 22, no. 1, pp. 1–6, 2012. DOI: https://doi.org/10.11128/sne.22.tn.10103
[32] A. Schlüter, M. Rosano, S. Böhm, N. Calisir, and J. Hesselbach, “Effects of implementing efficiency techniques in the plastics industry in Germany and Western Australia—a comparative modelling assessment,” in Proc. 10th Conf. Sustainable Manufacturing, Istanbul, Turkey, 2012, pp. 525–530.
[33] M. Gebler, S. Witte, S. A. Blume, M. Muhl, and M. Finkbeiner, “The ‘Impact Points’-method: A distance-to-target weighted approach to measure the absolute environmental impact of Volkswagen’s global manufacturing system,” J. Clean. Prod., vol. 386, 135646, 2023, doi: https://doi.org/10.1016/j.jclepro.2022.135646. DOI: https://doi.org/10.1016/j.jclepro.2022.135646
Published
How to Cite
Conference Proceedings Volume
Section
License
Copyright (c) 2026 Manuel Berendes, Patrick Dehning, Schlüter Alexander
This work is licensed under a Creative Commons Attribution 4.0 International License.