Vol. 1 (2022): Vision and Strategies for Reinforcing Additively Manufactured Concrete Structures

Front cover Open Conference Proceedings volume 1 2022

4 November 2021, Technische Universität Dresden

Editors

Prof. Dr.-Ing. Asko Fromm, Hochschule Wismar

Univ. Prof. Dr.-Ing. Viktor Mechtcherine, TU Dresden

Review process

The contributions (max. 10 A4 pages) undergo a double-blind review process via Open Conference Proceedings.

Financing

Funding for the publication of this volume is provided by the DFG-funded Scientific Network: Adaptive Armierung geometrisch komplexer zementgebundener Formkörper. Project identifier: German Research Foundation (DFG) - Project number 326129619.

DOI: https://doi.org/10.52825/ocp.v1i

Published: 2022-02-15

Full Conference Proceedings Volume

Preface

Preface

Asko Fromm

1
- PDF
- XML

Architecture and Reinforcement

No Reinforcement – Compression-Only Structures The Striatus Footbridge

Philippe Block

3
A Framework for Large-Scale Structural Applications of 3D Printed Concrete: the Case of a 29 m Bridge in the Netherlands

Zeeshan Ahmed, Rob Wolfs, Freek Bos, Theo Salet

5-19
Strategies for Integrating Straight Rebar in 3DCP Columns and Shear Walls

Ana-Maria Anton, Lex Reiter, Eleni Skevaki

21

Reinforcing Methods

Strategies for Integrating Reinforcement Into 3D Concrete Printing at the TU Dresden

Egor Ivaniuk, Steffen Müller, Tobias Neef, Viktor Mechtcherine

23-34
Digital Concrete Production With Vertical Textile Reinforcement First Trials

Gözdem Dittel, Martin Scheurer, Steffen Dringenberg, Joaquin Velasco Jitton, Thomas Gries

35-43
Reinforcement Strategies for Additive Manufacturing in Construction Based on Dynamic Fibre Winding: Concepts and Initial Case Studies

Stefan Gantner, Tom-Niklas Rothe, Christian Hühne, Norman Hack

45-59

Reinforcing Materials

Combining Wire and Arc Additive Manufacturing and Selective Paste Intrusion for Additively Manu-factured Structural Concrete Fundamental Investigations on the Effect of Heat Exposure by WAAM on the Rheological and Intrusion Behavior of Cement Paste in the Particle Bed During Selective Paste Intrusion

Alexander Straßer, Daniel Weger, Carla Matthäus, Thomas Kränkel, Christoph Gehlen

61-72
Simultaneous Integration of Continuous Mineral-Bonded Carbon Reinforcement Into Additive Manufacturing With Concrete

Tobias Neef, Viktor Mechtcherine

73-81
Interlayer Reinforcement in Shotcrete-3D-Printing The Effect of Accelerator Dosage on the Resulting Bond Behavior of Integrated Reinforcement Bars

Niklas Freund, Dirk Lowke

83-95

Visions

Optimizing Reinforcement Structural Analysis, Challenges and Strategies

Adam Orlinski, Klaas De Rycke, Moritz Heimrath

97-98
Magnetic Alignment of Microsteel Fibers as Strategy for Reinforcing UHPFRC

Lukas Ledderose, Abtin Baghdadi, Harald Kloft

99-114
Felt-Concrete Composites in Architecture and Design

Mirco Becker

115