Optimizing s-CO₂ Brayton Power Cycle Performance in Cold Ambient Conditions Using Working Fluid Blends

Authors

DOI:

https://doi.org/10.52825/solarpaces.v4i.2908

Keywords:

Brayton Power Cycle, S-CO₂, Working Fluid Mixtures, Cold-Climate, Cycle Optimization, Heat Recuperators, Recompression, Thermal Efficiency

Abstract

Supercritical CO₂ (s-CO₂) Brayton cycles offer high efficiency and a compact design for power generation, but their performance degrades in sub-zero ambient temperature. This study investigates optimizing the performance of a recompression s-CO₂ Brayton cycle under cold ambient conditions (from 35ºC to -70ºC) using binary s- CO₂ mixtures with CF₄, CH₄, and NF₃ as additives. We focus on cycle configurations that maintain a minimum 4K temperature difference (pinch point) in both high-temperature recuperator (HTR) and low-temperature recuperator (LTR) to ensure feasible heat exchanger design. Parametric simulations show that optimizing the distribution of heat exchanger conductance allocation (UA) and recompression fraction significantly improves efficiency under these cold ambient conditions. For instance, the 60%CO₂-40%CF₄ mixture, at a -7.5 °C compressor inlet temperature (CIT), achieves 54.4% thermal efficiency while maintaining HTR and LTR pinch points differences of 4.16 K and 4.47 K, respectively. Similarly, a CH₄-rich blend (30%CO₂-70%CH₄) at -46.1 °C CIT yields a 57.7% efficiency with HTR and LTR pinch points differences of 12.2 Kand 6.0 K respectively. These results highlight the critical role of both fluid composition and recuperator design in achieving high performance within realistic thermal integration limits. This study provides guidance for designing advanced power blocks suited for cold-climate solar thermal and energy systems.

Downloads

Download data is not yet available.

References

[1] Wu, P., Ma, Y., Gao, C., Liu, W., Shan, J., Huang, Y., ... & Ran, X. (2020). A review of research and development of supercritical carbon dioxide Brayton cycle technology in nuclear engineering applications. Nuclear Engineering and Design, 368, 110767. https://doi.org/10.1016/j.nucengdes.2020.110767 DOI: https://doi.org/10.1016/j.nucengdes.2020.110767

[2] Yuan, F. X., Liu, S. H., Liu, M. Y., Li, H. Y., Huang, Y. P., Zhu, X. L., & Jahanzaib, M. (2024). Design and optimization of space nuclear power system with sCO2 Brayton cycle on Mars. Progress in Nuclear Energy, 176, 105375. https://doi.org/10.1016/j.pnucene.2024.105375 DOI: https://doi.org/10.1016/j.pnucene.2024.105375

[3] Lu, T., You, E., Zhang, H., & Ma, F. (2025). Investigation and optimization on performance of an innovative Brayton cycle in space nuclear power system. Progress in Nuclear Energy, 185, 105766. https://doi.org/10.1016/j.pnucene.2025.105766 DOI: https://doi.org/10.1016/j.pnucene.2025.105766

[4] Yang, J., Yang, Z., & Duan, Y. (2021). Novel design optimization of concentrated solar power plant with S-CO2 Brayton cycle based on annual off-design performance. Applied Thermal Engineering, 192, 116924. https://doi.org/10.1016/j.applthermaleng.2021.116924 DOI: https://doi.org/10.1016/j.applthermaleng.2021.116924

[5] Khatoon, S., & Kim, M. H. (2022). Preliminary design and assessment of concentrated solar power plant using supercritical carbon dioxide Brayton cycles. Energy Conversion and Management, 252, 115066. https://doi.org/10.1016/j.enconman.2021.115066 DOI: https://doi.org/10.1016/j.enconman.2021.115066

[6] Tafur-Escanta, P., Valencia-Chapi, R., & Muñoz-Antón, J. (2025). Entropy analysis of new proposed Brayton cycle configurations for solar thermal power plants. Thermal Science and Engineering Progress, 103670. https://doi.org/10.1016/j.tsep.2025.103670 DOI: https://doi.org/10.1016/j.tsep.2025.103670

[7] Du, J., Guo, J., Zhang, Z., Li, M., Ren, F., & Liu, Y. (2022). A triple cascade gas turbine waste heat recovery system based on supercritical CO2 Brayton cycle: thermal analysis and optimization. Energy Conversion and Management: X, 16, 100297. https://doi.org/10.1016/j.ecmx.2022.100297 DOI: https://doi.org/10.1016/j.ecmx.2022.100297

[8] Chen, J., Tan, S., Liao, G., & Zhang, F. (2024). Dynamic performance and control analysis of supercritical CO2 brayton cycle for solid oxide fuel cell waste heat recovery. Applied Thermal Engineering, 250, 123556. https://doi.org/10.1016/j.applthermaleng.2024.123556 DOI: https://doi.org/10.1016/j.applthermaleng.2024.123556

[9] Tafur-Escanta, P., López-Paniagua, I., & Muñoz-Antón, J. (2023). Thermodynamics analysis of the supercritical CO2 binary mixtures for Brayton power cycles. Energy, 270, 126838. https://doi.org/10.1016/j.energy.2023.126838 DOI: https://doi.org/10.1016/j.energy.2023.126838

[10] Valencia-Chapi, R., Coco-Enríquez, L., & Muñoz-Antón, J. (2019). Supercritical CO2 mixtures for advanced brayton power cycles in line-focusing solar power plants. Applied Sciences, 10(1), 55. https://doi.org/10.3390/app10010055 DOI: https://doi.org/10.3390/app10010055

[11] M. Baiguini, M. Doninelli, E. Morosini, D. Alfani, G. Di Marcoberardino, P.G. Iora, G. Manzolini, C.M. Invernizzi, M. Astolfi, 1175 Small scale CO₂ based trigeneration plants in heat recovery applications, Appl. Therm. Eng. 255 (2024) 123943. 1176 https://doi.org/10.1016/j.applthermaleng.2024.123943 DOI: https://doi.org/10.1016/j.applthermaleng.2024.123943

[12] E. Morosini, D. Alfani, S.I. Salah, A. Abdeldanyem, F. Crespi, G. Di Marcoberardino, G. Manzolini, Off-design of a CO₂-based 1169 mixture transcritical cycle for CSP applications: Analysis at part load and variable ambient temperature, Appl. Therm. Eng. 236 1170 (2024) 121735. https://doi.org/10.1016/j.applthermaleng.2023.121735 DOI: https://doi.org/10.1016/j.applthermaleng.2023.121735

[13] E. Morosini, P. Rodriguez de Arriba, S.I. Salah, V. Illyés, X. Guerif, M. Ruggiero, G. Di Marcoberardino, G. Manzolini, Transcritical cycles with CO₂-based mixtures for CSP applications: An overview of the SCARABEUS findings, SolarPACES Conf. Proc. 2 (2023) 788. https://doi.org/10.52825/solarpaces.v2i.788 DOI: https://doi.org/10.52825/solarpaces.v2i.788

[14] Coco-Enríquez, L. Nueva Generación de Centrales Termosolares con Colectores Solares Lineales Acoplados a Ciclos Supercríticos de Potencia. Ph.D. Thesis, UPM, Spain, 2017. http://dx.doi.org/10.20868/UPM.thesis.44002 DOI: https://doi.org/10.20868/UPM.thesis.44002

[15] Dyreby, J.J. Modeling the Supercritical Carbon Dioxide Brayton Cycle with Recompression. Ph.D. Thesis, University of Wisconsin-Madison, 2014. https://sel.me.wisc.edu/publications/theses/dyreby14.zip DOI: https://doi.org/10.1115/1.4027936

[16] Lemmon, E.W. et al., NIST Standard Reference Database 23: REFPROP Version 10.0 (2018). https://www.nist.gov/srd/refprop

[17] Follett IV, W. W., Moore, J., Wade, J., & Pierre, S. (2024). The STEP 10 MWe sCO₂ pilot installation and commissioning status update. Proceedings of the 8th International Supercritical CO₂ Power Cycles Symposium (Paper #74), February 26-29, 2024, San Antonio, TX, USA. https://sco2symposium.com/proceedings2024/74-paper.pdf

Downloads

Published

2026-10-21

How to Cite

Coco-Enríquez, L., Muñoz-Antón, J., Valencia-Chapi, R., & Tafur-Escanta, P. (2026). Optimizing s-CO₂ Brayton Power Cycle Performance in Cold Ambient Conditions Using Working Fluid Blends. SolarPACES Conference Proceedings, 4. https://doi.org/10.52825/solarpaces.v4i.2908
Received 2025-09-09
Accepted 2026-05-11
Published 2026-10-21

Funding data

  • Comunidad de Madrid
    Grant numbers ACES4NET0-CM program with project reference TEC-2024/ECO116