Molten Salt Technology: A Flexible Outlook for Power-Gas Interconnection

Authors

DOI:

https://doi.org/10.52825/solarpaces.v4i.2918

Keywords:

Molten Salt Thermal Energy Storage, Carnot Batteries, Energy Hub

Abstract

To achieve a climate-neutral energy system, the inherent intermittency of renewable energy sources (RES) must be addressed with advanced storage solutions. Molten salt (MS)-based thermal energy storage (TES) systems are a promising option, distinguished by their high thermal stability, favorable thermophysical properties, and proven scalability in Concentrated Solar Power (CSP) plants. In this paper the authors present the findings of the Joint Research Activity within the EU-funded SALTOpower project, which seeks to advance MS technologies for future integrated energy systems. The research investigates three main areas: the characterization and optimization of MS mixtures; their deployment in Carnot Battery (CB) systems; and their integration into industrial and thermochemical processes for renewable fuel production. Special attention is given to matching MS compositions with specific power cycles (e.g., Rankine and supercritical CO2 Brayton) to maximize system efficiency and reduce levelized costs. Furthermore, the study explores the application of MS-driven heat in Power-to-X (P2X) and Heat-to-X (H2X) pathways, including the production of hydrogen and syngas, thereby enabling crucial cross-sectoral energy integration. By bridging electricity, heat, and fuel domains, MS technologies can act as energy hub integrating electrical, thermal, and chemical energy vectors. Conseguentlythey emerge as a key element for resilient, low-carbon energy infrastructures, in full alignment with the European Union’s strategic objectives for sustainability and energy integration.

Downloads

Download data is not yet available.

References

[1] European Commission. “The European Green Deal - Striving to be the first climate-neutral continent”. European Union website. https://commission.europa.eu/strategy-and-policy/priorities-2019-2024/european-green-deal_en (15th September 2025).

[2] European Commission. “Fit for 55: Delivering on the Proposals”. European Union. https://commission.europa.eu/strategy-and-policy/priorities-2019-2024/european-green-deal/delivering-european-green-deal/fit-55-delivering-proposals_en (15th September 2025).

[3] European Commission. “REPowerEU - Affordable, secure and sustainable energy for Europe”. European Union. https://commission.europa.eu/topics/energy/repowereu_en (15th September 2025).

[4] European Commission. “The Net-Zero Industry Act: Making the EU the home of clean technologies manufacturing and green jobs”. European Union. https://single-market-economy.ec.europa.eu/industry/sustainability/net-zero-industry-act_en (15th September 2025).

[5] “Clean Hydrogen Mission”. Mission Innovation. https://mission-innovation.net/missions/hydrogen/ (15th September 2025).

[6] A. Caraballo, S. Galán-Casado, Á. Caballero, S. Serena, “Molten Salts for Sensible Thermal Energy Storage: A Review and an Energy Performance Analysis,” Energies, vol. 14, no.14, pp. 1197–2021, Feb., 2021, https://doi.org/10.3390/EN14041197.

[7] P. Bhatnagar, S. Siddiqui, I. Sreedhar, R. Parameshwaran, “Molten Salts: Potential Candidates for Thermal Energy Storage Applications,” Int. J. Energy Res., vol.46, no.13, pp. 17755–17785, May, 2022, https://doi.org/10.1002/er.8441.

[8] K. Vignarooban, X. Xu, A. Arvay, K. Hsu, A. M. Kannan, “Heat Transfer Fluids for Concentrating Solar Power Systems – A Review,” Appl. Energy, vol.146, pp. 383–396, Jul., 2015, https://doi.org/10.1016/j.apenergy.2015.01.125.

[9] R.W. Bradshaw, D.E. Meeker, “High-temperature stability of ternary nitrate molten salts for solar thermal energy systems,” Sol. Energy Mater., vol. 21, pp. 51–60, Nov., 1990, https://doi.org/10.1016/0165-1633(90)90042-Y.

[10] A. Bonk, S. Sau, N. Uranga, M. Hernaiz, T. Bauer, “Advanced heat transfer fluids for direct molten salt line-focusing CSP plants,” Prog. Energy Combust. Sci., vol.67, pp. 69–87, Jul., 2018, https://doi.org/10.1016/j.pecs.2018.02.002.

[11] W. Ding, T. Bauer, “Progress in Research and Development of Molten Chloride Salt Technology for Next Generation Concentrated Solar Power Plants,” Engineering, vol.7, no.3, pp. 334–347, Mar., 2021, https://doi.org/10.1016/J.ENG.2020.06.027.

[12] C. Villada, W. Ding, A. Bonk, T. Bauer, “Engineering Molten MgCl2–KCl–NaCl Salt for High-Temperature Thermal Energy Storage: Review on Salt Properties and Corrosion Control Strategies,” Sol. Energy Mater. Sol. Cells, vol.232, pp. 111344, Oct., 2021, https://doi.org/10.1016/j.solmat.2021.111344.

[13] K. Mahboob, A. A. Khan, M. A. Khan, J. Sarwar, T. A. Khan, “Comparison of Li2CO3-Na2CO3-K2CO3, KCl-MgCl2 and NaNO3-KNO3 as Heat Transfer Fluid for Different sCO2 and Steam Power Cycles in CSP Tower Plant under Different DNI Conditions,” Adv. Mech. Eng. , vol.13, no.4, Apr., 2021, https://doi.org/10.1177/16878140211011900.

[14] M. D’Auria, A. C. Tizzoni, F. Rovense, S. Sau, L. Turchetti, D. Canavarro, J. Marchã, P. Horta, M. Lanchi, “Molten Salt Mixtures as an Energy Carrier for Thermochemical Processes of Renewable Gas Production: Review and Perspectives,” App. Sci, vol.15, no.12, pp. 6916, Jun.,2025, https://doi.org/10.3390/app15126916.

[15] T. Delise, A. C. Tizzoni, M. Ferrara, N. Corsaro, C. D’Ottavi, S. Sau, S. Licoccia, “Thermophysical, Environmental, and Compatibility Properties of Nitrate and Nitrite Containing Molten Salts for Medium Temperature CSP Applications: A Critical Review,” J. Eur. Ceram. Soc., vol.39, no.1, pp. 92–99, Jan., 2019, https://doi.org/10.1016/j.jeurceramsoc.2018.07.057.

[16] A. Vecchi, K. Knobloch, T. Liang, H. Kildahl, A. Sciacovelli, K. Engelbrecht, Y. Li, Y. Ding, “Carnot Battery development: A review on system performance, applications and commercial state-of-the-art,” J. Energy Storage, vol.55, pp. 105782, Nov., 2022, https://doi.org/10.1016/j.est.2022.105782.

[17] T. Liang, A. Vecchi, K. Knobloch, A. Sciacovelli, K. Engelbrecht, Y. Li, Y.Ding, “Key components for Carnot Battery: Technology review, technical barriers and selection criteria,” Renew. Sustain. Energy Rev., vol. 163, pp. 112478, Jul., 2022, https://doi.org/10.1016/j.rser.2022.112478.

[18] J. D. McTigue, P. Farres-Antunez, A. J. White, C. N. Markides, J. Martinek, J. Jorgenson, T. Neises, M. Mehos, 2022. “Integrated Heat Pump Thermal Storage and Power Cycle for CSP: Final Technical Report,” National Renewable Energy Laboratory. NREL/TP-5700-79806, Mar., 2022, https://www.nrel.gov/docs/fy22osti/79806.pdf.

[19] V. Novotny, V. Basta, P. Smola, J. Spale, “Review of Carnot Battery Technology Commercial Development”, Energies, vol.15, no.2, pp. 647, Jan., 2022, https://doi.org/10.3390/en15020647.

[20] Q. Gong, H. Shi, Y. Chai, R. Yu, A. Weisenburger, D. Wang, A. Bonk, T. Bauer, W. Ding, “Molten chloride salt technology for next-generation CSP plants: Compatibility of Fe-based alloys with purified molten MgCl2-KCl-NaCl salt at 700 °C,” Appl. Energy, vol.324, pp.119708, Oct.,2022, https://doi.org/10.1016/J.APENERGY.2022.119708.

[21] F. Crespi, D. Sánchez, J.M. Rodríguez, G. Gavagnin, “A thermo-economic methodology to select sCO2 power cycles for CSP applications,” Renew. Energy, vol. 147, pp. 2905–2912, Mar., 2020, https://doi.org/10.1016/j.renene.2018.08.023.

[22] J. Shingledecker, J. De Barbadillo, D. O’Donnell, S. McCoy, B. Baker, S. Coryell, “Materials improvements for improved economy of high-temperature components in future gen 3 CSP systems,” AIP Conf. Proc., vol.2126, no.1, Jul., 2019, https://doi.org/10.1063/1.5117512.

[23] P. Krummenacher, B. Muster, “Methodologies and software tools for integrating solar heat into industrial processes," International Energy Agency, 2015.

[24] L. Kumar, M. Hasanuzzaman, N. A. Rahim, “Global advancement of solar thermal energy technologies for industrial process heat and its future prospects: A review,” Energy Convers. Manag., vol.195, pp. 885–908, Sept., 2019, https://doi.org/10.1016/j.enconman.2019.05.081.

[25] M. D’Auria, R. Grena, M. Lanchi, R. Liberatore, “Heat Supply to Industrial Processes via Molten Salt Solar Concentrators,” Energies, vol.17, no.18, pp. 4541, Sept., 2024, https://doi.org/10.3390/en17184541.

[26] J. Sanz-Bermejo, J. Muñoz-Antón, J. Gonzalez-Aguilar, M. Romero, “Optimal Integration of a Solid-Oxide Electrolyser Cell into a Direct Steam Generation Solar Tower Plant for Zero-Emission Hydrogen Production,” Appl. Energy, vol.131, pp. 238–247, Oct., 2014, https://doi.org/10.1016/j.apenergy.2014.06.028.

[27] A. Monforti Ferrario, F. Santoni, M. Della Pietra, M. Rossi, N. Piacente, G. Comodi, L. Simonetti, “A System Integration Analysis of a Molten Carbonate Electrolysis Cell as an Off-Gas Recovery System in a Steam-Reforming Process of an Oil Refinery,” Front. Energy Res., vol.9, pp. 655915, Apr., 2021, https://doi.org/10.3389/fenrg.2021.655915.

[28] J. Norman, K. Mysels, R. Sharp, D. Williamson, “Studies of the Sulfur-Iodine Thermochemical Water-Splitting Cycle,” Int. J. Hydrogen Energy, vol.7, no.7, pp. 545–556, 1982, doi:10.1016/0360-3199(82)90035-0.

[29] G.F. Naterer, S. Suppiah, L. Stolberg, M. Lewis, Z. Wang, M. A. Rosen, I. Dincer, K. Gabriel, A. Odukoya, E. Secnik, E. B. Bastan, V. Papangelakis, “Progress in Thermochemical Hydrogen Production with the Copper–Chlorine Cycle,” Int. J. Hydrogen Energy, vol. 40, no. 19, pp. 6283–6295, May, 2015, https://doi.org/10.1016/J.IJHYDENE.2015.02.124.

[30] A. Giaconia, G. Iaquaniello, G. Caputo, B. Morico, A. Salladini, L. Turchetti, G. Monteleone, A. Giannini, E. Palo, “Experimental Validation of a Pilot Membrane Reactor for Hydrogen Production by Solar Steam Reforming of Methane at Maximum 550 °C Using Molten Salts as Heat Transfer Fluid,” Int. J. Hydrogen Energy, vol.45, no.58, pp. 33088–33101, Nov., 2020, https://doi.org/10.1016/j.ijhydene.2020.09.070.

[31] B. B. Krishna, B. Biswas, T. Bhaskar, “Gasification of Lignocellulosic Biomass,” in Biomass, Biofuels, Biochemicals: Biofuels: Alternative Feedstocks and Conversion Processes for the Production of Liquid and Gaseous Biofuels, 2nd ed. Cambridge, Massachusetts, U.S.: Academic Press, 2019, ch. 12, pp. 285–300.

[32] C. R. Correa, A. Kruse, “Supercritical Water Gasification of Biomass for Hydrogen Production – Review,” J. Supercrit. Fluids, vol.133, pp. 573–590, Mar., 2018, https://doi.org/10.1016/j.supflu.2017.09.019.

[33] S. Jha, J. A. Okolie, S. Nanda, A. K. Dalai, “A Review of Biomass Resources and Thermochemical Conversion Technologies,” Chem. Eng. Technol., vol.45, no.5, pp. 791–799, Feb., 2022, https://doi.org/10.1002/ceat.202100503.

[34] S. Raikova, J. L. Wagner, C. D. Le, V. P. Ting, C. J. Chuck, “Towards an Aviation Fuel Through the Hydrothermal Liquefaction of Algae,” in Biofuels for Aviation: Feedstocks, Technology and Implementation, Amsterdam, Netherlands, 2016, ch. 9, pp.217–39. https://doi.org/10.1016/B978-0-12-804568-8.00009-3.

Downloads

Published

2026-10-23

How to Cite

D'Auria, M., Tizzoni, A. C., Turchetti, L., Lanchi, M., Canavarro, D., Marchã, J., … De Iuliis, S. (2026). Molten Salt Technology: A Flexible Outlook for Power-Gas Interconnection. SolarPACES Conference Proceedings, 4. https://doi.org/10.52825/solarpaces.v4i.2918

Conference Proceedings Volume

Section

Thermal Energy Storage Materials, Media, and Systems
Received 2025-09-25
Accepted 2026-05-11
Published 2026-10-23

Funding data