Production-Ready Decomposition of Series Resistance Into Lateral and Fixed Components

Authors

  • Don Clugston WAVELABS Solar Metrology Systems GmbH
  • Bernhard Klöter WAVELABS Solar Metrology Systems GmbH

DOI:

https://doi.org/10.52825/siliconpv.v3i.2699

Keywords:

Rs, Lateral Resistance, Characterization, Series Resistance

Abstract

The series resistance (Rs) of a solar cell is commonly treated as a constant, but this is a very poor approximation: in modern cells, Rs can vary by a factor of 4 depending on illumination, bias voltage, and temperature. The naïve model leads to incorrect characterization of cell parameters and misattribution of cell losses. Wagner’s linear-response series resistance (LR-Rs) model attempts to treat Rs rigorously but experimental confirmation of the model is limited to EL and PL measurements. In this work we validate the LR-Rs model using IV measurements at multiple light intensities. We find a hyperbolic dependence of Rs on diode current as predicted by Wagner. The LR-Rs model fits the data extraordinarily well, but with a much higher geometric dependency than predicted by Wagner. We show that the model allows us to decompose series resistance into lateral and fixed components. This decomposition is now available in all WAVELABS commercial LED flashers. We illustrate the immediate benefits of this improved model in commissioning of a heterojunction production line.

Downloads

Download data is not yet available.

References

[1] M. Wolf and H. Rauschenbach, "Series Resistance Effects on Solar Cell Measurements", Advanced Energy Conversion, vol.3, no.2, pp. 455–479, Apr. 1963, doi: https://doi.org/10.1016/0365-1789(63)90063-8

[2] J.-M. Wagner, J. Carstensen, and R. Adelung, “Injection Dependence of the Local Series Resistance: Extending the Illumination Intensity Variation Method”, SiliconPV 2021, doi: https://doi.org/10.1063/5.0089259

[3] D. Lan and M. A. Green, “Generalised distributed model of a solar cell: Lateral injection effects and impact on cell design and characterisation”, Solar Energy Materials and Solar Cells, vol. 147 pp. 108-114, 2016, doi: https.doi.org/10.1016/j.solmat.2015.12.005

[4] J.-M. Wagner, J. Carstensen, and R. Adelung, “Fundamental Aspects Concerning the Validity of the Standard Equivalent Circuit for Large‐Area Silicon Solar Cells,” Phys. Sta-tus Solidi A, vol. 217, no. 2, Art. no. 1900612, Jan. 2020, doi: https://doi.org/10.1002/pssa.201900612

[5] J.-M. Wagner, J. Carstensen, and R. Adelung, “On the General Current Dependence of the Distributed Series Resistance of Solar Cells: The Influence of the Base Resistivity”, SiliconPV 2023, DOI: https://doi.org/10.52825/siliconpv.v1i.854

Downloads

Published

2025-12-12

How to Cite

Clugston, D., & Klöter, B. (2025). Production-Ready Decomposition of Series Resistance Into Lateral and Fixed Components. SiliconPV Conference Proceedings, 3. https://doi.org/10.52825/siliconpv.v3i.2699

Conference Proceedings Volume

Section

Characterisation, Modelling and Simulation
Received 2025-04-12
Accepted 2025-07-22
Published 2025-12-12